Owners manual

Preparation 5
4. Click "Connect" in your wireless network connection window.
In the Infrastructure mode
In this mode, the projector is connected to the local area network wirelessly and ready to
be accessed by any computer on the same local area network.
1. Connect both the RJ45 cable to the RJ45 port and wireless dongle to the USB port
of the projector.
2. Make sure the projector is connected to the local area network through wired
connection. See "Wired connection" on page 3 for detail.
3. Enter the address of the projector in the address bar of your browser and press
Enter.
4. Open the Admin page of the Projector Network Display System and log in.
See page 16 for details.
5. Go to the Wireless LAN page and change the Connection mode to
Infrastructure mode.
Wired/wireless LAN
Laptop computer
Desktop computer
Projector
RJ45 cable
RJ45 cable
RJ45 cable
Wireless dongle
Wireless
dongle