Owners manual

Projecting computer screen contents22
3. On your computer, make sure
QPresenter is downloaded and
installed. See "Downloading
QPresenter" on page 7 and "Installing
QPresenter" on page 7 for detail.
4. Open QPresenter by clicking the icon.
5. Go to Settings > Advanced Settings.
6. Click Yes in the Activate Broadcasting
row.
7. Select the same channel in the drop-
down list and click Apply.
Using the USB cable to display computer content
(for selective models)
1. Take a USB cable and connect one end to your computer and the other end to the
USB mini B port on the projector.
2. Press SOURCE and select USB Display in the source bar.
3. Go to My Computer on you PC and double-click the BenQ QPresenter icon.
4. The projector automatically displays the content in your computer.
Supported Resolutions
The projected computer screen will be automatically rescaled to 1024 x 768.
Using the Projection Login Code
This function is designed to ensure network display through the correct projector. To
toggle this function:
1. Go to the SYSTEM SETUP: Advanced > Network Settings menu after
opening the OSD menu system. Press MODE/ENTER.
2. Press to highlight Projection Log In Code and press / to select On or
Off.
When this function is on, the projector generates a random 4-digit code in the upper right
corner when you switch the source to Network Display. You need to key in this 4-digit
code in the QPresenter when connecting to the projector.