Owners manual

Projecting computer screen contents 21

Up to 8 projectors displaying one computer screen

1. Connect the projectors to the same local area network through wired connection or

wireless connection in the Infrastructure mode. See "Connecting the projector with

your computer" on page 3 for detail.

2. Connect your computer to the same local area network.

3. Make sure QPresenter is downloaded

and installed. See "Downloading

QPresenter" on page 7 and "Installing

QPresenter" on page 7 for detail.

4. Open QPresenter by clicking the icon.

5. Go to Settings > Basic Settings menu.

6. Click Activate 1:N Display and click

Apply.

Up to 255 projectors displaying one computer

screen (for selective models)

This is the Broadcasting function which allows your computer to send screen content to

up to 255 projectors as long as they are on the same local area network and same channel.

• The function requires special version of the QPresenter. Please download it from your User Manuel CD.

• This function is only available when the Network Display source is selected.

• The minimum system requirement for your computer is Intel Core 2 Duo 2.4GHz CPU, 2G DDR.

1. Connect the projectors to the same local area network through wired connection.

2. Selecting a certain channel for each projector.

i. Go to the SYSTEM SETUP: Advanced > Network Settings menu after

opening the OSD menu system. Press MODE/ENTER.

ii. Press to highlight Broadcasting and press / to select On.

i. Open the Projector Network Display System and go to the Basic page.

ii. Click ON in the Broadcasting row and select a channel using the drop-down

list.