Datasheet

A
djusting the Ceiling Bracket 9
Horizontal Angle Adjustment
1. Loosen the two sets of screws connecting the PIPE-BASE and the
H-ADJUST ADAPTER.
2. Adjust the horizontal angle so that it is correct for the orientation of the
screen.
3. Re-tighten the two sets of screws connecting the PIPE-BASE and the
H-ADJUST ADAPTER.
4. The swivel angle can be set within a range of negative to positive 30
degrees.
Ver t i cal An g l e Ad just m e n t
1. Loosen the two sets of screws connecting the H-ADJUST ADAPTER
and the PROJECTOR ADAPTER.
2. Adjust the vertical angle to the correct one for the orientation of the
screen.
3. Re-tighten the 2 sets of screws connecting the H-ADJUST ADAPTER
and the PROJECTOR ADAPTER.
4. The tilt angle can be adjusted in a range between +5 and -15 degrees.
5