Datasheet

Section 1: Quick Start Guide6
English
Remote control usage tips
• Do not cover the sensor window on the front of the TV (below the power
indicator lamp), or place objects in front of it which will block the direct line-
of-sight between the remote control and the sensor window on TV.
• Do not let the remote control become wet, or place it in humid environments
(like bathrooms.)
• If the remote control sensor window on the TV is in direct sunlight or strong
light, the remote control may not operate properly. In this situation, change the
light source or readjust the angle of your TV, or operate the remote control from
a location closer to the remote control sensor window on the TV.
Test the remote control
• Point and aim the top front of the
remote control directly at the TV
when pressing the buttons.
• The remote control must be held at
an angle within 30 degrees of the TV's
remote control sensor window to
function correctly. The distance
between the remote control and the
sensors should not exceed 5 meters.
30 degrees
5 meters
Press Power/standby on the remote control (as highlighted
in the illustration). The TV should turn on, and the power
indicator change to green. If so, progress to the next step ("8.
Initialize your TV" on page 7.
If the TV does not turn on, first check that the power is available
(the power indicator will be lit red). If so, try pressing
(Power/standby) on the right side of the TV. If the TV turns
on by this method, the problem lies with the remote control.
In that case, check that the remote control batteries are properly
installed. If need be, replace the batteries with new ones or
known good ones. See "Troubleshooting" on page 51 for further
assistance.
To turn off the TV, press
(Power/standby) on the right side
of the TV, or
Power/standby on the remote control again,
and the TV will return to standby mode (the power indicator
will turn red.)