Datasheet

Section 1: Quick Start Guide 5
English
damaged, turn off the power and unplug the power cable from the TV. Transport
the TV to your nearest BenQ authorised service centre for repair.
• There are no user serviceable parts in this TV. Never unscrew or remove any
covers. There are dangerous voltages inside. Turn off the power and unplug the
power cable before moving the TV.
6. Adjust viewing angle
7. Activate the remote control
1. Locate the remote control and batteries from the packaging, and unwrap
them.
Be cautious when handling batteries. See "Battery safety notice" on page 44.
This TV is equipped with a swivable stand.
If necessary, turn the TV screen to an
appropriate angle for more comfortable
viewing.
2. Turn the remote control end up to reveal its base,
and open the lid of the battery compartment by
using a small coin or similarly curved object to
rotate the slot 90° anticlockwise. The lid is spring
loaded and will popup and come loose from the
remote control body.
3. Insert the batteries (supplied) ensuring that the
positive and negative marked battery terminals
match the (+) and (-) marks in the battery
compartment.
Note that these batteries are provided for your
convenience so that you can operate the TV
straight away. You should replace them as soon as
possible.
4. Refit the lid of the battery compartment by
inserting the hinge into the recess at one edge and
levering the lid down into position with the
thumb of the hand holding the remote control
body.
5. Whilst holding the lid in place in this manner, use
your other hand and a small coin or similarly
shaped object to rotate the locking slot 90°
clockwise locking the lid in place.