Datasheet

Section 1: Quick Start Guide4
English
4. Connect the antenna cable
Connect a TV antenna cable fly-lead from your TV antenna system or Cable
TV (CATV) to the ATV input on the TV. Check to make sure that the cable
connection is firmly in place.
• A poor quality TV signal will produce a poor picture and/or sound on your TV.
For high quality picture and sound, you will need a high quality TV signal.
Depending upon your location, for best TV signal reception, you should have a
properly aligned outdoor TV antenna system. If need be, consult a professional
antenna specialist.
• This TV has a built-in analog TV tuner, which requires the TV antenna cable
connection to an external TV antenna system. If you wish to make use of the
digital LCD screen to view digital TV, you should connect an external digital TV
tuner (decoder) set top box (STB) to the TV using a digital signal cable (HDMI or
DVI) connection. See "Getting to know your TV" on page 12.
5. Connect the power cable
1. Locate the power cable suitable for your region from the packaging,
unwrap it, and plug the appropriate end into the AC INLET socket on the
rear of the TV (as illustrated below).
2. Connect the other end into an appropriate wall power outlet, and switch it
on (if switched). The TV will enter standby mode and the power indicator
(on the front lower right) will light up red.
• The type of power cable plug and socket illustrated may differ from the type
used in your region.
• Only use an appropriate power cable for your region. Never use a power cable
which appears damaged or frayed. Never change the plug type on a power
cable. Be aware of total loading when using extension cords or multiple outlet
power boards.
WARNING:
• This TV has been engineered and manufactured with the highest priority on
safety, however, IMPROPER HANDLING OR USE CAN RESULT IN POTENTIAL
ELECTRICAL SHOCK OR FIRE HAZARD. Please handle this TV with care. If
Antenna cable
Power cable
Power outlet