Datasheet
Reference52
English
Degraded colours or hue
• Try a different input source to confirm if the
symptom is still present or whether the source is at
fault.
• Check for mis-connection of cables for that input.
• Make sure the antenna cable is properly connected.
• Change programs to confirm if the symptom is still
present or whether the program station is at fault.
• Try a different picture mode to check that picture
settings haven't been altered.
• Check the picture properties in the
Picture menu.
• The source may be set to output NTSC. Alter it to
PAL.
The image appears too
'washed out', or the
darkest areas of the image
appear too bright
• Reduce the brightness level until the black areas of
the picture appear as black.
• The input source device (e.g. DVD player)
brightness level may be set too high. Reduce its
brightness level.
The image appears too
bright, and there is a loss
of definition in the brightest
areas of the image
• Reduce the contrast level until the over brightness is
gone, and the bright area definition returns.
• The input source device (e.g. DVD player)
brightness level may be set too high. Reduce its
brightness level.
• The AV video signal has not been terminated
properly somewhere in the external AV equipment.
Check the connection and try again.
Remote control does not
function properly
• Check for incorrect battery orientation.
• Check for dead batteries
• Check your distance and angle from the TV.
• Check whether remote control is properly being
pointed at the TV's remote control sensor window.
• Check for any obstacle between the remote control
and the remote control sensor window.
• Check that the remote control sensor window is not
under strong fluorescent lighting. or in direct
sunlight.
• Check for any devices (PC or personal digital
assistant, PDA) nearby that transmit infrared
signals which may cause interference to signal
transmission between the remote control and the
TV. Turn off the infrared function of these devices.
Picture is not clear when
using PC input
If
PC is selected as the input signal source, use the
Auto function in the Picture menu to let the TV
adjust the picture settings automatically.
Symptoms Possible Causes