Datasheet

Connecting audio and video inputs30
English
Connecting the DVI input
Connecting the stereo audio output
1. Connect the digital video output of your
output equipment to the HDMI terminal
on the TV using a DVI to HDMI adaptor
cable (not provided).
2. Connect the DVI audio output of your
output equipment to the TV's DVI- AUDIO
L/R input terminals using an appropriate
audio cable (not provided).
To view video image from this input, press
Input and select DVI.
Remember to set the type of DVI input
according to the device connected (a PC or
digital Set Top Box) in the Setup menu. See
"DVI Input" on page 43.
The DVI input only supports signals higher
than 480i and 576i. When connected to a
High Definition Set Top Box, it is
recommended that you set the output
resolution to 1080i.
When you connect the TV to a PC, you
should adjust the resolution in the display
properties of the computer to closely match
the native resolution of the TV (for example,
1360 x 768 pixels). See "Supported PC (D-
Sub/DVI) input signal resolution" on page 50
on other supported resolutions.
This TV provides a set of (RCA type) stereo
audio output terminals for delivering the audio
signal to a sound system or other audio devices.
Connect the audio input terminals of an
amplifier or other audio device to the AUDIO
OUT L/R terminals on the TV using a suitable
audio cable.
This output is always available. Its level is fixed
and cannot be adjusted by the Volume setting
of the TV.
DVI to HDMI
adaptor cable
PC
Audio
cable
Audio
amplifier
Audio cable