Datasheet

Using the remote control24
English
Using the sleep timer
The sleep timer is useful if you want the TV to automatically to go into
standby mode after a set period of time.
1. Press
Sleep/blue on the remote control to activate the sleep timer
function.
2. Press the button again to set the time interval. Time is set in increments of
30 minutes, from 0 to 180 minutes.
1 minute before the expiration of the set time, a message will display on-screen
as a reminder. You can press
OK to reset the sleep timer and the TV will
remain on. At the expiration of this time, the TV will be turned off
automatically.
Adjusting backlight
To adjust the intensity of your TV's backlight system, press Backlight on
the remote control to select between Bright, Normal, Dark or Auto.
When viewing the TV in dimly lit rooms it is recommended to set the
backlight to
Dark which will reduce the image brightness and make the dark
areas of the image darker thus maintaining a high contrast image in a dark
environment. If
Auto is selected, the ambient light sensor on the TV will be
activated and the TV’s backlight will be changed automatically according to
the ambient lighting condition.
Using the Teletext function
Press Teletext on the remote control to display Teletext, and again to turn
it off.
Teletext is only available when ATV, Composite Video (via the AV1, AV2, AV4 and
AV5 inputs) or S-Video (via the AV4-S and AV5-S inputs) is selected as the input
source, and a signal which transmits Teletext is currently displayed. Not all TV
stations and video signals broadcast Teletext. If in doubt, please contact the TV
station or the video source provider.
When Teletext displays on-screen, you can:
• Press
Mode to cycle between Teletext only and superimposed on the
video image.
• Press
Index to go to the Teletext index page.
• Press
Reveal to display any concealed Teletext information if available.
• Press
Subpage to view the subpages when provided.
If subpages are available, the page number (at top left) will display a small red
"s": e.g. "100s".
• Press Aspect/Teletext size / to enlarge Teletext size. Press it again to
resume normal size.
• Press
Freeze /Teletext freeze / to freeze Teletext messages. Press it
again to restore normal update.
• Press
TV sound/red , Audio/green , Preset/yellow or Sleep /
blue to jump to the corresponding coloured pages as displayed across
the bottom of the Teletext screen.
• Press or to go to the previous or next Teletext page, or to move
between subpages when selected.