Datasheet

Using the remote control 21
English
Using the remote control
Power on and standby
Turning the TV on
After plugging the TV's power cable into a wall outlet and turning on the main
power switch, the TV will enter standby mode automatically. The power
indicator will light up red.
Press
(Power/standby) on the TV, or Power/standby on the remote
control. The TV will turn on and the power indicator will change to green.
You can also turn the TV on and view ATV input by pressing P (Program) , P
(Program)
 or any Program selection numeric button on the remote control.
Putting the TV to standby
Press (Power/standby) on the TV, or Power/standby on the remote
control again, and the TV will return to standby mode. The power indicator
will turn red.
Switching inputs
1. Turn on all connected equipment or devices before selecting an input.
2. Press
INPUT on the TV, or Input on the remote control to display the
current selected input. Press the button repeatedly until your desired input
is displayed. The sequence is as follows:
• DVI will appear only when DVI signal is connected to the HDMI input.
• AV4-S and AV5-S will appear only when S-Video signals are connected to the
AV4 and AV5 S-Video inputs.
• If both Composite Video (AV) and S-Video signals are connected to the AV4 or
AV5 inputs at the same time, only S-Video input will be displayed. If you wish to
view the Composite Video (AV) input in such case, remove the S-Video
connection temporarily.
• Be aware that HDMI input must be HDCP-compliant to be displayed.
Adjusting sound settings
Adjusting volume
• Press (Volume)on the TV, or Volume + on the remote control to
increase volume. The volume indicator increases in length as volume rises.
• Press
(Volume)on the TV, or Volume - on the remote control to
decrease volume. The volume indicator decreases in length as volume falls.
Mute setting
• Press Mute on the remote control to turn off the audio temporarily.
• Press
Mute again, or press Volume + or Volume - to restore the
sound level.
The sound level will also be restored if the TV is put to standby mode and
subsequently turned on.
ATV
AV 1
AV 2
AV 3
AV 4 (or AV4-S)
AV 5 (or AV5-S)HDMI (or DVI)
PC