Datasheet

Introduction16
English
Rear view
No. Name Description
1AC-INLET
Connect to the AC power cable. See "5. Connect the power
cable" on page 4.
2 AUDIO OUT
Connect to the audio input of an audio or sub-woofer
amplifier. This output is always available, however, its level
is fixed and cannot be controlled by the Volume. See
"Connecting the stereo audio output" on page 30.
3
AV4 VIDEO
AV4 S-VIDEO
Connect to either the Composite Video (AV) or S-Video
output as appropriate for your AV source device. See
"Connecting the Composite Video input" on page 27 and
"Connecting the S-Video input" on page 28.
Connect your external AV device using either the
Composite Video or S-Video inputs. S-Video provides a
better quality image. If both are connected to an AV
source at the same time, only S-Video input will be
displayed.
AV4 AUDIO L/R
Connect to the audio output of either the Composite Video
or S-Video output as appropriate for your AV source
device. (These inputs are common for either Composite
Video or S-Video audio.) See "Connecting the Composite
Video input" on page 27 and "Connecting the S-Video
input" on page 28.
4
AV3 Y C
B/PB
CR/PR
Connect each to the component video (Y CB/PB CR/PR)
output of an appropriate video source device. See
"Connecting the Component Video input" on page 28.
AV3 AUDIO L/R
Connect each to the component audio output of an
appropriate video source device to match that of each
component video input. See "Connecting the Component
Video input" on page 28.