Datasheet

Section 1: Quick Start Guide8

English

9. View the TV programs

Care and cleaning information

• Always turn off the TV before cleaning.

• Do NOT use cream, liquid, aerosol or spray cleaners. Use only a slightly

damp well wrung-out (drip-free) and lint-free, clean soft cloth and lightly

wipe the TV.

• If necessary, use a pH-neutral liquid dish-washing detergent diluted with

water on a separate clean lint-free cloth to remove oil or grease marks. Wipe

over again with a clean dry lint-free cloth to remove any smear marks.

• Under close examination and in certain circumstances, you may notice that a

few non-active pixels appear on the screen as a fixed point of colour. Please

note that this does not affect the performance of your product as it is usually

not visible at normal viewing distances.

• If the TV is not going to be used for an extended period of time (like when

you’re going away for holidays), it should be switched off and unplugged

from the wall outlet. You should also consider removing the batteries from

the remote control (as they may leak).

• To help prevent possible 'LCD Image Persistence', you should ensure that

static images are never displayed for extended periods of time (days) and that

you turn off the screen for several hours every day or so.

Press

P (Program)  or P (Program) on the remote control (as

highlighted in the illustration) or

(Program) or

(Program)on the TV to view the TV programs available in

your area.

You can also change to a program directly by selecting the station

number using the numeric program selection button(s) on the

remote control:

• To select a single-digit program number, press the corresponding

program selection button. For example, to select program 8,

press .

• To select a two-digit program number, press

Program entry ,

followed by the corresponding program selection buttons. For

example, to select program 28, press

Program entry and

then , .

• To return to the previous viewed program or input, press

Recall (also highlighted in the illustration).

To alter the volume, press + or - on the remote control,

(Volume)or (Volume)on the TV. The volume

indicator will display on-screen.

Please refer to the User Manual for further information about the

TV and its operation.