User Manual
Table Of Contents
- Copyright
- Disclaimer
- Product support
- Q&A index
- Safety precautions
- Getting started
- Getting to know your monitor
- How to assemble your monitor hardware
- How to adjust your monitor
- The control panel
- 5-way controller and basic menu operations
- Working with the hot keys
- Hotkey Puck G2 and its basic operations
- Adjusting Display Mode
- Choosing an appropriate color mode
- Working with two or more video sources with one set of keyboard and mouse (KVM Switch)
- Displaying two sources at the same time (PIP/PBP)
- Working with HDR technology
- Working with two color settings on the same image (DualView)
- Navigating the main menu
- Troubleshooting
59 Navigating the main menu
Options for data transfer via USB-C™
Burn-in
Cleaner
Screen burn-in or image retention may be found on the
screen if a still image is displayed for an extended period of
time. Enable this function to help reduce the visible fixed lines
or shades on the screen by showing several default patterns.
Once enabled, to disable this function, press any of the control keys.
Screen burn-in occurs due to panel limitation and should not be
considered as a manufacturing defect. To avoid screen burn-in, do
not play a still image for an extended period of time in the first
place. Use your computer's power management function.
• YES
• NO
Information Displays the product information. • Model Name
• Version
• Usage Time
Reset All Resets all mode, color and geometry settings to the factory
default values.
• YES
• NO
Item Function Range
3840 x 2160@60 Hz + USB 2.0
3840 x 2160@30 Hz + USB 3.2
Gen 1
Refresh rate 60 Hz 30 Hz
USB transmission speed 480 Mbps 5 Gbps