User Manual
Table Of Contents
- Copyright
- Disclaimer
- Product support
- Q&A index
- Safety precautions
- Getting started
- Getting to know your monitor
- How to assemble your monitor hardware
- How to adjust your monitor
- The control panel
- 5-way controller and basic menu operations
- Working with the hot keys
- Hotkey Puck G2 and its basic operations
- Adjusting Display Mode
- Choosing an appropriate color mode
- Working with two or more video sources with one set of keyboard and mouse (KVM Switch)
- Displaying two sources at the same time (PIP/PBP)
- Working with HDR technology
- Working with two color settings on the same image (DualView)
- Navigating the main menu
- Troubleshooting
58 Navigating the main menu
Power Awake By default, this function is disabled, and the USB ports are not
supplied with power while the monitor is in standby mode.
To keep supplying power to the USB ports in monitor’s
standby mode, change the setting to ON.
• ON
• OFF
Advanced DDC/CI Allows the monitor settings to be set through
the software on the PC.
DDC/CI, short for Display Data
Channel/Command Interface, which was
developed by Video Electronics Standards
Association (VESA). DDC/CI capability allows
monitor controls to be sent via the software for
remote diagnostics.
• ON
• OFF
Auto Power
Off
Sets the time to power off the monitor
automatically in power saving mode.
• OFF
• 10 min
• 20 min
• 30 min
DisplayPort Selects an appropriate DP standard for data
transmission.
• 1.1
• 1.4
OSD Key
Bri.
Adjusts the brightness of the power key’s LED
indicator.
• ON
• OFF
AMA Improves the gray level response time of the
LCD panel.
• OFF
• High
• Premium
System
Setting
Shows the current monitor property settings. • Signal Input
• Timing
• Brightness
• Contrast
• Color Gamut
• Pixel
Encoding
• RGB Range
Item Function Range