User Manual
Table Of Contents
- Copyright
- Disclaimer
- Product support
- Q&A index
- Safety precautions
- Getting started
- Getting to know your monitor
- How to assemble your monitor hardware
- How to adjust your monitor
- The control panel
- 5-way controller and basic menu operations
- Working with the hot keys
- Hotkey Puck G2 and its basic operations
- Adjusting Display Mode
- Choosing an appropriate color mode
- Working with two or more video sources with one set of keyboard and mouse (KVM Switch)
- Displaying two sources at the same time (PIP/PBP)
- Working with HDR technology
- Working with two color settings on the same image (DualView)
- Navigating the main menu
- Troubleshooting
40 How to adjust your monitor
Switch from the KVM Switch menu
Go to KVM Switch to manually select a source.
Scenario A: Working with two computers and one monitor
1. Establish cable connection to enable KVM function as instructed in Establishing KVM con-
nections on page 37.
2. Go to System > Power Awake and make sure it is set to ON.
3. Press the custom key 2 (as the hot key for Input by default) or the rotation key on Hotkey
Puck Gen 2 (as the hot key for KVM Switch by default) to switch.
Scenario B: Working in PBP mode
1. Establish cable connection as instructed in Establishing KVM connections on page 37.
2. Go to System > Power Awake and make sure it is set to ON.
3. Enable PBP function from Signal Input > PBP. Select sources properly as instructed in
Displaying two sources at the same time (PIP/PBP) on page 41.
DisplayPort
HDMI
None
MoveBack Confirm
Mode: Adobe RGB
USB-C
DisplayPort
HDMI
Display
Color
KVM Switch
Audio
Custom Key
System
2
USB 1
USB 2
If it can't use KVM,
please check
1. Input Source is
connected
2. Select the correct
physical input source
for USB
KVM Switch: ON
(USB-C)
(DP +
USB 1 Upstream)
or
USB-C in control Switched to be DP in control
(USB-C)
(DP +
USB 1 upstream)
USB-C in control Switched to be DP in control