User Manual
Table Of Contents
- Copyright
- Disclaimer
- Product support
- Q&A index
- Safety precautions
- Getting started
- Getting to know your monitor
- How to assemble your monitor hardware
- How to adjust your monitor
- The control panel
- 5-way controller and basic menu operations
- Working with the hot keys
- Hotkey Puck G2 and its basic operations
- Adjusting Display Mode
- Choosing an appropriate color mode
- Working with two or more video sources with one set of keyboard and mouse (KVM Switch)
- Displaying two sources at the same time (PIP/PBP)
- Working with HDR technology
- Working with two color settings on the same image (DualView)
- Navigating the main menu
- Troubleshooting
32 How to adjust your monitor
Working with the hot keys
The custom keys (located next to the 5-way controller) perform as hot keys to provide direct
access to pre-defined functions. You can change the default setting and designate different
functions for these keys.
Accessing the hot key functions
1. Press any of the custom keys on the rear of the monitor.
2. Press the key with the desired function repeatedly to cycle through available options on the
list.
Customizing the hot keys
1. Press the 5-way controller to bring up the hotkey menu.
2. Select (Menu) to access the main menu.
3. Go to Custom Key.
4. Select the custom key you want to change. It is either Custom Key 1 or Custom Key 2.
5. On the sub menu, select a category.
OSD icon Function
Switches to a list of Color Mode options by default.
To change the default settings, see Customizing the hot keys on page 32.
Switches to a list of Input (Signal Input) options by default.
To change the default settings, see Customizing the hot keys on page 32.
Input
USB-C
DisplayPort
HDMI
1
2
1
2