User Manual
Table Of Contents
- Copyright
- Disclaimer
- Product support
- Q&A index
- Safety precautions
- Getting started
- Getting to know your monitor
- How to assemble your monitor hardware (for monitors with height adjustment stand)
- How to assemble your monitor hardware (for monitors without height adjustment stand)
- How to adjust your monitor
- The control panel
- 5-way controller and basic menu operations
- Setting up your monitor for different scenarios
- Switching the inputs quickly with the looping key
- Working with the Quick Menu
- Available menu options to each Color Mode
- Adjustable OSD settings
- Working with the HDRi hot key
- Adjusting screen brightness automatically (Bright Intelligence Plus)
- Working with HDR technology
- Choosing an audio scenario
- Adjusting display mode
- Choosing an appropriate color mode
- Connecting the monitor to your MacBook series product
- Enabling color vision accessibility (Color Weakness)
- Activating FreeSync™ Premium
- Working with Video Format Support technology
- Initial setup for playing games at 165 Hz
- Navigating the main menu
- Troubleshooting
34
Using the monitor wall mounting kit (purchased separately) (for
models without height adjustment stand)
The back of your LCD monitor has a VESA standard mount with 100mm pattern, allowing the installation
of a wall mount bracket. Before starting to install a monitor wall mounting kit, please read the
precautions carefully.
Precautions
• Install your monitor and monitor mounting kit on a wall with flat surface.
• Ensure that the wall material and the standard wall mount bracket (purchased separately) are stable
enough to support the weight of the monitor. Refer to the product specifications on the website for
weight information.
• Turn off the monitor and the power before disconnecting the cables from the LCD monitor.
1. Remove the monitor stand.
Lay the screen face down on a clean and well-padded
surface. Detach the monitor stand as instructed in step 1~2
in How to detach the stand and the base (for monitors
without height adjustment stand) on page 33.
2. Remove the VESA cover and the screws.
Remove the VESA cover as illustrated, and then use a
cross-pointed screwdriver to release the screws inside. The
use of a magnetic-head screwdriver is recommended to
avoid of losing the screws.