User Manual

33
How to detach the stand and the base (for monitors without height
adjustment stand)
1. Prepare the monitor and area.
Turn off the monitor and the power before unplugging the
power cable. Turn off the computer before unplugging the
monitor signal cable.
Protect the monitor and screen by clearing a flat open area
on your desk and placing a soft item like a towel on the
desk for padding, before laying the screen face down on a
flat clean padded surface.
Please be careful to prevent damage to the monitor. Placing the
screen surface on an object like a stapler or a mouse will crack
the glass or damage the LCD substrate voiding your warranty.
Sliding or scraping the monitor around on your desk will scratch
or damage the monitor surround and controls.
2. Remove the monitor stand.
Push down the stand gently until you cannot go further so
you can see the release button clearly.
Insert a pointed object such as a screwdriver to the hole
above the monitor stand arm, and then push the
screwdriver against the release button inside the hole. Then
pull the monitor stand backward away from the monitor.
3. Remove the monitor base.
Release the screw on the bottom of the monitor base and
detach the monitor base as illustrated.
In case you intend to use your monitor on the stand in the
future, please keep the monitor base and monitor stand
somewhere safe for future use.
1
2
Release button
1
2