User Manual

29
Orient and align the stand arm with the monitor, then push
them together until they click and lock into place.
Carefully lift the monitor, turn it over and place it upright
on its stand on a flat even surface.
2. Remove the cover of the cable management
system.
The stand arm also works as a cable management system
that helps keep the cables neat and clean. Slide the cable
cover up to align the marking on the cable cover with the
unlock icon on the stand arm. Remove the cover as
illustrated.
Pass the cable through the cable management hole on the
stand arm first while cabling. Start with the ones with bigger
connectors.
Allow enough cable length while cabling to avoid loose
connection and to save the pins or socket connectors from
being bent or broken.
3. Connect the power cable to the monitor.
Pass the cable through the cable management hole on the
stand arm first.
Plug one end of the power cord into the socket labelled
on the rear of the monitor. Do not connect the other
end to a power outlet just yet.
2
1