User Manual

Table Of Contents

How to detach the stand and the base (for monitors with height

adjustment stand)

1. Prepare the monitor and area.

Turn off the monitor and the power before unplugging the

power cable. Turn off the computer before unplugging the

monitor signal cable.

2. Remove the I/O cover.

Gently lift the display up and extend it to the maximum

extended position. Then tilt the monitor to install/remove

the I/O cover easily.

Remove the I/O cover from its bottom as illustrated. You

might want to tilt the monitor to remove it easily. Unplug

all cables carefully.

Protect the monitor and screen by clearing a flat open area

on your desk and placing a soft item like a towel on the

desk for padding, before laying the screen face down on a

flat clean padded surface.

Please be careful to prevent damage to the monitor. Placing the

screen surface on an object like a stapler or a mouse will crack

the glass or damage the LCD substrate voiding your warranty.

Sliding or scraping the monitor around on your desk will scratch

or damage the monitor surround and controls.

3. Remove the monitor stand.

While pressing and holding the VESA mount release button

( ), detach the stand from the monitor ( and ).