User Manual
Table Of Contents
- Copyright
- Disclaimer
- Product support
- Q&A index
- Safety precautions
- Getting started
- Getting to know your monitor
- How to assemble your monitor hardware (for monitors with height adjustment stand)
- How to assemble your monitor hardware (for monitors without height adjustment stand)
- How to adjust your monitor
- The control panel
- 5-way controller and basic menu operations
- Setting up your monitor for different scenarios
- Switching the inputs quickly with the looping key
- Working with the Quick Menu
- Available menu options to each Color Mode
- Adjustable OSD settings
- Working with the HDRi hot key
- Adjusting screen brightness automatically (Bright Intelligence Plus)
- Working with HDR technology
- Choosing an audio scenario
- Adjusting display mode
- Choosing an appropriate color mode
- Connecting the monitor to your MacBook series product
- Enabling color vision accessibility (Color Weakness)
- Activating FreeSync™ Premium
- Working with Video Format Support technology
- Initial setup for playing games at 165 Hz
- Navigating the main menu
- Troubleshooting
20
Carefully lift the monitor, turn it over and place it upright
on its stand on a flat even surface.
2. Connect the power cable to the monitor.
Pass the cable through the cable management hole on the
stand arm first.
Plug one end of the power cord into the socket labelled
on the rear of the monitor. Do not connect the other
end to a power outlet just yet.
3. Connect the video cable.
The video cables included in your package and the socket illustrations in this document may vary depending on the
product supplied for your region.
• Connect the plug of the HDMI cable to the HDMI port on the monitor. Connect the other end of
the cable to the HDMI port of a digital output device.
• Connect the plug of the DP cable to the monitor video socket. Connect the other end of the cable
to the computer video socket.
or or