User Manual
Table Of Contents
- Copyright
- Disclaimer
- Product support
- Q&A index
- Safety precautions
- Getting started
- Getting to know your monitor
- How to assemble your monitor hardware
- Getting the most from your BenQ monitor
- How to adjust your monitor
- The control panel
- Basic menu operation
- Customizing the hot keys
- Adjusting display mode
- Choosing an appropriate picture mode
- Adjusting screen brightness automatically (Bright Intelligence, selected models only)
- Enabling color vision accessibility (Color Weakness)
- Working with the built-in microphone
- Charging the connected device via USB-C™ port
- Connecting multiple monitors via MST (Multi-Stream Transport)
- Navigating the main menu
- Troubleshooting
34 How to adjust your monitor
3. Select an appropriate display mode. The setting will take effect immediately.
Choosing an appropriate picture mode
Your monitor provides various picture modes that are suitable for different types of images. See
Mode menu on page 41 for all the available picture modes.
Go to Mode for a desired picture mode.
If Low Blue Light Plus is preferred, select Low Blue Light Plus to enable it. And go to Eye
Care and Low Blue Light Plus to select one of the low blue light modes from the list.
Adjusting screen brightness automatically (Bright Intelligence,
selected models only)
The built-in light sensor works with Bright Intelligence technology to detect the ambient light,
image brightness and contrast, and then balance the screen automatically. It helps keep image
details as well as to reduce eye strain.
To enable this function, go to Eye Care > Bright Intelligence > ON.
Enabling color vision accessibility (Color Weakness)
Color Weakness is accessibility that helps people with color vision deficiency to distinguish
colors. You are provided with Red Filter and Green Filter on this monitor. Choose one as
needed.
1. Go to Eye Care > Color Weakness.
2. Choose either Red Filter or Green Filter.
3. Adjust the value of the filter. A stronger effect is produced as the value increases.
Working with the built-in microphone
If the video source is via USB-C™ port, the built-in microphone will be turned on automatically
by showing the LED indicator in green. You can mute the microphone by pressing the MIC key.
Check MIC LED indicator on page 35 for more information.
To adjust the volume, go to Audio > Microphone. See Microphone on page 48 for more
information.
The Bright Intelligence function works with certain picture modes only. If it is not available, its menu options will
become grayed out.
The performance of Bright Intelligence may be impacted by the light sources and the monitor tilt angle. You can
increase the light sensor sensitivity from
Eye Care > Bright Intelligence > Sensor Sensitivity if needed. See
Sensor Sensitivity on page 43 for more information.