User Manual
Table Of Contents
- Copyright
- Disclaimer
- Product support
- Q&A index
- Safety precautions
- Getting started
- Getting to know your monitor
- How to assemble your monitor hardware
- Getting the most from your BenQ monitor
- How to adjust your monitor
- The control panel
- Basic menu operation
- Customizing the hot keys
- Adjusting display mode
- Choosing an appropriate picture mode
- Adjusting screen brightness automatically (Bright Intelligence, selected models only)
- Enabling color vision accessibility (Color Weakness)
- Working with the built-in microphone
- Charging the connected device via USB-C™ port
- Connecting multiple monitors via MST (Multi-Stream Transport)
- Navigating the main menu
- Troubleshooting
17 How to assemble your monitor hardware
2. Connect the PC video cable
The video cables included in your package and the socket illustrations on the right may vary depending on the
product supplied for your region.
• Connect the plug of the HDMI cable to the HDMI port on the monitor. Connect the other end of
the cable to the HDMI port of a digital output device.
• Connect the plug of the DP cable to the monitor video socket. Connect the other end of the
cable to the computer video socket.
• Connect the plug of the supplied USB-C™ cable to the USB-C™ port on the monitor. Connect
the other end of the cable to the USB-C™ port of a laptop. It allows signal, audio, and data
transmission from the laptop to the monitor.
Tighten all finger screws to prevent the plugs from accidently falling out during use.
3. Connect the headphone.
You may connect headphones to the headphone jack
found on the rear of the monitor.
or or