User Manual
Table Of Contents
- Copyright
- Disclaimer
- Product support
- Q&A index
- Safety precautions
- Getting started
- Getting to know your monitor
- How to assemble your monitor hardware
- Getting the most from your BenQ monitor
- How to adjust your monitor
- The control panel
- Basic menu operation
- Customizing the hot keys
- Adjusting display mode
- Choosing an appropriate picture mode
- Adjusting screen brightness automatically (Bright Intelligence, selected models only)
- Enabling color vision accessibility (Color Weakness)
- Working with the built-in microphone
- Charging the connected device via USB-C™ port
- Connecting multiple monitors via MST (Multi-Stream Transport)
- Navigating the main menu
- Troubleshooting
14 Getting to know your monitor
Power delivery of USB-C™ ports on your monitor
With the power delivery function, your monitor helps supply power to the connected
USB-C™ devices. Available power varies by port. Make sure the devices are connected to the
appropriate ports to be activated properly with sufficient power.
• A connected device needs to be equipped with a USB-C™ connector that supports charging
function via USB power delivery.
• The connected device can be charged via USB-C™ port even when the monitor is in power
saving mode.(*)
• The USB power delivery is up to 60W. If the connected device requires more than 60W for
operation or for boot up (when the battery is drained), use the original power adapter that
came with the device.
• The information is based on the standard testing criteria and is provided for reference. The
compatibility is not guaranteed as the user environments vary. If a separately purchased
USB-C™ cable is used, make sure the cable is certified by USB-IF and is full-featured, with
power delivery and video / audio / data transfer functions.
GW2485TC / GW2485TE / GW2785TC / GW2785TE
USB-C™ Power Delivery
5V / 3A
9V / 3A
12V / 3A
15V / 3A
20V / 3A
*: Charging via USB-C™ in monitor power saving mode is available when the USB-C power delivery function is
enabled. Go to System > USB-C Charging 60W and select ON.