User Manual
Table Of Contents
- Copyright
- Disclaimer
- Product support
- Power safety
- Getting started
- Getting to know your monitor
- How to assemble your monitor hardware
- Getting the most from your BenQ monitor
- How to adjust your monitor
- The control panel
- 5-way controller and basic menu operations
- Working with the hot keys
- Hotkey Puck G2 and its basic operations
- Adjusting Display Mode
- Choosing an appropriate color mode
- Working with two video sources (KVM Switch)
- Video source selection in PIP mode
- Video source selection in PBP mode
- Connecting multiple monitors (Thunderbolt™ 3 daisy chaining)(PD2720U / PD3220U)
- Working with HDR technology
- Working with two color settings on the same image (DualView)
- Navigating the main menu
- Troubleshooting
73 Navigating the main menu
Advanced DDC/CI Allows the monitor settings to be set through
the software on the PC.
DDC/CI, short for Display Data
Channel/Command Interface, which was
developed by Video Electronics Standards
Association (VESA). DDC/CI capability allows
monitor controls to be sent via the software for
remote diagnostics.
• ON
• OFF
Auto Power
Off
Sets the time to power off the monitor
automatically in power saving mode.
• OFF
• 10 min
• 20 min
• 30 min
DisplayPort Selects an appropriate DP standard for data
transmission.
(PD2720U /
PD3220U)
• 1.1
• 1.2
• 1.4
(PD3420Q)
• 1.1
• 1.4
OSD Key
Bri.
Adjusts the brightness of the power key’s LED
indicator.
(PD2720U /
PD3220U)
• 1
• 2
• 3
(PD3420Q)
• ON
• OFF
System
Setting
Shows the current monitor property settings. • Input
• Timing
• Brightness
• Contrast
• Color Gamut
• Pixel
Encoding
• Color Depth
• RGB Range
Item Function Range