User Manual
Table Of Contents
- Copyright
- Disclaimer
- Product support
- Power safety
- Getting started
- Getting to know your monitor
- How to assemble your monitor hardware
- Getting the most from your BenQ monitor
- How to adjust your monitor
- The control panel
- 5-way controller and basic menu operations
- Working with the hot keys
- Hotkey Puck G2 and its basic operations
- Adjusting Display Mode
- Choosing an appropriate color mode
- Working with two video sources (KVM Switch)
- Video source selection in PIP mode
- Video source selection in PBP mode
- Connecting multiple monitors (Thunderbolt™ 3 daisy chaining)(PD2720U / PD3220U)
- Working with HDR technology
- Working with two color settings on the same image (DualView)
- Navigating the main menu
- Troubleshooting
59 Navigating the main menu
Display
Mode
This feature is provided to allow aspect ratios other
than 16:9 or 21:9 (depending on the purchased
model) to be displayed without geometric distortion.
The options under Display Mode will be different
depending on the input signal sources.
Depending on your selection of Color Mode, different
Display Mode option is pre-set. Change the setting if
needed.
Full Ideal for 16:9 or 21:9 (depending on
the purchased model) aspect images.
1: 1 Displays the input image in its native
resolution without scaling.
Overscan Slightly enlarges the input image. Use this feature to
hide annoying edge noise if present around your
image.
Available only when the input source is HDMI.
• ON
• OFF
Item Function Range