User Manual
Table Of Contents
- Copyright
- Disclaimer
- Product support
- Power safety
- Getting started
- Getting to know your monitor
- How to assemble your monitor hardware
- Getting the most from your BenQ monitor
- How to adjust your monitor
- The control panel
- 5-way controller and basic menu operations
- Working with the hot keys
- Hotkey Puck G2 and its basic operations
- Adjusting Display Mode
- Choosing an appropriate color mode
- Working with two video sources (KVM Switch)
- Video source selection in PIP mode
- Video source selection in PBP mode
- Connecting multiple monitors (Thunderbolt™ 3 daisy chaining)(PD2720U / PD3220U)
- Working with HDR technology
- Working with two color settings on the same image (DualView)
- Navigating the main menu
- Troubleshooting
50 How to adjust your monitor
The monitor keeps the setting of two input sources for future use until the setting is manually
changed.
Video source selection in PBP mode
1. Go to Input > PBP, PBPx4 or PBP 5:9.
2. Select the preferred source for each window.
Connecting multiple monitors (Thunderbolt™ 3 daisy
chaining)(PD2720U / PD3220U)
With monitor connection via Thunderbolt™ 3 ports, you can output content to up to 6
devices (including 2 monitors) via daisy chain function.
1. Connect your laptop to the Thunderbolt™ 3 port ( ) on the monitor using a Thunder-
bolt™ 3 cable. This port supplies power to the laptop.
2. Connect the second monitor to the first one using a Thunderbolt™ 3 cable as illustrated.
3. Power on the laptop and the monitors.
4. On your laptop, decide the way you want the content to be displayed on the connected
monitors: Duplicate, Extend, or Projector only. Additional software (purchased
separately) may be used to manage the display. Refer to the manual of the purchased
software for more information.
Thunderbolt™ 3
cable
Thunderbolt™ 3 cable