User Manual
Table Of Contents
- Copyright
- Disclaimer
- Product support
- Power safety
- Getting started
- Getting to know your monitor
- How to assemble your monitor hardware
- Getting the most from your BenQ monitor
- How to adjust your monitor
- The control panel
- 5-way controller and basic menu operations
- Working with the hot keys
- Hotkey Puck G2 and its basic operations
- Adjusting Display Mode
- Choosing an appropriate color mode
- Working with two video sources (KVM Switch)
- Video source selection in PIP mode
- Video source selection in PBP mode
- Connecting multiple monitors (Thunderbolt™ 3 daisy chaining)(PD2720U / PD3220U)
- Working with HDR technology
- Working with two color settings on the same image (DualView)
- Navigating the main menu
- Troubleshooting
32 How to assemble your monitor hardware
Viewing angle adjustment
You may position the screen to the desired angle with the monitor tilt, swivel, and height
adjustment functions. Check the product specifications on the website for details.
To avoid the edge of the LCD display hitting the monitor base surface while it is being
rotated, do tilt and extend the monitor to the highest position before you start to rotate
the display. You should also make sure there are no obstacles around the monitor and
there is enough room for cables.
4. Adjust the monitor to the desired viewing
angle.