User Manual
Table Of Contents
- Copyright
- Disclaimer
- Product support
- Power safety
- Getting started
- Getting to know your monitor
- How to assemble your monitor hardware
- Getting the most from your BenQ monitor
- How to adjust your monitor
- The control panel
- 5-way controller and basic menu operations
- Working with the hot keys
- Hotkey Puck G2 and its basic operations
- Adjusting Display Mode
- Choosing an appropriate color mode
- Working with two video sources (KVM Switch)
- Video source selection in PIP mode
- Video source selection in PBP mode
- Connecting multiple monitors (Thunderbolt™ 3 daisy chaining)(PD2720U / PD3220U)
- Working with HDR technology
- Working with two color settings on the same image (DualView)
- Navigating the main menu
- Troubleshooting
26 How to assemble your monitor hardware
6. Connect the power cable to the monitor.
Plug one end of the power cord into the socket labelled
on the rear of the monitor. Do not connect the
other end to a power outlet just yet.
7. Install the back cover.
Align the back cover with the holes on the back of the
monitor, and press both sides and the upper part of the
cover against the holes to lock it into place as
illustrated.
Push the lower part of the back cover toward the
monitor to secure it.
8. Organize the cables.
Route the cables via the cable clip.
9. Connect-to and turn-on the power.
Plug the other end of the power cord into a power
outlet and turn it on.
Picture may differ from product supplied for your region.
Turn on the monitor by pressing the power button on
the monitor.
1
2