User Manual
Table Of Contents
- Copyright
- Disclaimer
- Power Safety
- Getting started
- Getting to know your monitor
- How to assemble your monitor hardware
- Getting the most from your BenQ monitor
- How to adjust your monitor
- The control panel
- The S Switch
- Basic menu operation
- Initial setup for playing games at 144 Hz / 240 Hz
- Customizing the hot keys
- Adjusting Dynamic Accuracy (selected models only)
- Setting up your own game mode
- Working with game mode to go by S Switch
- Adjusting display mode
- Using Smart Scaling
- Using Instant Mode
- Activating VESA standard DisplayPort Adaptive-Sync (XL2540 / XL2740 / XL2746S only)
- Enabling color vision accessibility (Color Weakness) (selected models only)
- Navigating the main menu
- Troubleshooting
54 Navigating the main menu
Auto
Power Off
Sets the time to power off the monitor
automatically in power saving mode.
• OFF
• 10min.
• 20min.
• 30min.
LED
Indicator
Determines the brightness of the LED
indicator.
• OFF
• Medium
• High
DDC/CI
Allows the monitor settings to be set through
the software on the PC.
DDC/CI, short for Display Data
Channel/Command Interface, which was
developed by Video Electronics Standards
Association (VESA). DDC/CI capability allows
monitor controls to be sent via the software for
remote diagnostics.
• ON
• OFF
Reset All Resets all mode, color and geometry settings to the factory
default values.
If an S Switch is connected to your monitor while performing this
operation, the game mode settings saved on S Switch will be reset
as well.
• YES
• NO
Item Function Range