User Manual

16 How to assemble your monitor hardware

6. Connect the audio cable.

Connect the audio cable between the socket on the

rear of the monitor (Line In) and your computer audio

outlet.

7. Install the cable cover.

After all cables haven been connected to the monitor,

work with the cable management system to route the

cables properly.

Align the marking on the cable cover to the unlock icon

on the stand arm. Install the cable cover back to the

stand arm, and slide down to lock it into place. The

marking on the cable cover should be aligned with the

lock icon on the stand arm by now.

8. Connect-to and turn-on the power.

Plug the other end of the power cord into a power

outlet and turn it on.

Picture may differ from product supplied for your region.

Turn on the monitor by pressing the power button on

the monitor.

Turn on the computer too, and follow the instructions

in Getting the most from your BenQ monitor on page

21 to install the monitor software.

To extend the service life of the product, we recommend

that you use your computer's power management function.

D-SUB

LINE IN