User Manual

41 Menu operation
Menu Settings
• Menu Type
Sets the OSD menu type according to your needs.
• Menu Display Time
Sets the length of time the OSD will remain active after your last key press.
• Menu Position
Sets the On-Screen Display (OSD) menu position.
Light Source
Information
This menu page displays the following information:
• Light Source Usage Time
• Light hours used under Normal Mode, ECO Mode, SmartEco Mode,
LampSave.
• And the Equivalent Light Hours.
For details about how to calculate the hours, see Getting to know the light hour
on page 45.
When a new lamp is installed, and you need to reset the timer, highlight Reset
Light Timer and select Reset.
Operation
Settings
• Reminder Message
Sets the reminder messages on or off.
• LED Indicator
You can turn off the LED warning lights. This is to avoid any light disturbance
when viewing images in a dark room.
• Power On/Off Settings
• Direct Power On: Allows the projector to turn on automatically once the
power is fed through the power cord.
• Auto Power Off: Allows the projector to turn off automatically if no input
signal is detected after a set period of time to prevent unnecessary waste of
light source life.
• BenQ HDMI Media Streaming (QS01)
With the optional QS01 installed on your projector (see Installing the QS01
HDMI Media Streaming (Optional) on page 18), you can select On to enable
functions related to the Android TV dongle (QS01), including:
• the reminder for plugging in ATV dongle.
• the handshaking mechanism between the Android TV dongle and projector
after power-on.