User Manual

24 Operation
Likewise, when you wish to switch from the Advanced OSD menu to the Basic OSD menu, follow
the instructions below:
1. Go to System > Menu Settings > Menu Type and press OK.
2. Press / to select Basic. Your projector will switch to the Basic OSD menu.
Securing the projector
Utilizing the password function
Setting a password
1. Go to Advanced menu - System > Security Settings. Press OK. The Security Settings page
appears.
2. Highlight Change Password and press OK.
3. The four arrow keys ( , , , ) respectively represent
4 digits (1, 2, 3, 4). According to the password you
desire to set, press the arrow keys to enter six digits for
the password.
4. Confirm the new password by re-entering the new
password.
5. To activate the Power On Lock function, go to
System > Security Settings > Power On Lock,
press OK and / to select On. Input the password
again.
If you forget the password
If you enter the wrong password, the password error message
will appear, and the Input Password message follows. If you
absolutely do not remember the password, you can use the
password recall procedure. See Entering the password recall
procedure on page 24.
If you enter an incorrect password 5 times in succession, the
projector will automatically shut down in a short time.
Entering the password recall procedure
1. Press and hold OK for 3 seconds. The projector will
display a coded number on the screen.
2. Write down the number and turn off your projector.
3. Seek help from the local BenQ service center to decode
the number. You may be required to provide proof of
purchase documentation to verify that you are an
authorized user of the projector.
• The digits being input will display as asterisks on-screen. Make a note of your selected password and keep it in a
safe place in advance or right after the password is entered so that it is available to you should you ever forget it.
• Once a password has been set and the Power On Lock is activated, the projector cannot be used unless the
correct password is entered every time the projector is started.
Input New Password
Return
Password Error
Please try again.
Please write down the recall code, and
contact BenQ Customer Center.
Recall Code:
CJ-2014-541638
Recall Password
Return