User Manual

61
Parental Control
To access the Parental Control menu, you must first set a password. Once the password is set, you may configure the following items.
Installation
The following table describes the items available in the Installation menu:
Item Options and descriptions
Auto Power Off Enables/Disables the automatic shutting off of the projector after the amount of time selected in the Timer Setting field.
Timer Setting Allows you to sets the amount of time in hours and minutes after which the projector automatically powers off.
Change System
Passcode
Allows you to change the system passcode.
Item Options and descriptions
Projector
Position
Chooses the position in which the projector is installed. See Choosing a location on page 28 for more details.
Auto Focus
Allows you to further configure the projector’s auto focus function. Options include: Real Time Adjustment and Sensitivity.
Geometry
Correction
Allows you to select which type of image adjustment you want to configure. Options include: Keystone and Corner Fit.
Once you select a type of image adjustment use the field below to make your adjustments.
Keystone
Setting / Corner
Fit Setting
Allows you to adjust the type of image adjustment in the Geometry Correction field. See Correcting keystone on page 40 and
Corner Fit on page 41 for more details.
Test Pattern
Displays the test pattern grid, which helps you adjust the image size and focus to check if the projected image is free of
distortion.