User Manual

54
Ending the Bluetooth connection
In cases where you want to disconnect the mobile device from the projector, either:
• Disconnect from the projector in the Bluetooth menu of your mobile device.
• Press the Bluetooth button on the projector to return the projector to projector mode.
• Press and hold the power button on the projector or remote control to power off the projector.
Pairing/Connecting to a Bluetooth speaker or headphones
1. Make sure the ATV dongle is installed properly (see Installing the ATV dongle on page 30).
2. Power on the projector (see Starting up the projector on page 33).
3. Press the settings button on the remote control
4. Select Remotes & Accessories.
5. Select Add accessory.
6. Activate Bluetooth-pairing mode on the speaker or headphones.
7. Select the speaker or headphones from the device list shown on screen.
8. Select Pair.
When the projector and speaker or headphones have successfully connected, the device will be labelled as Connected in the Network & Internet.
You can now output the audio from the ATV to the speaker or headphone.
• The projector can only transmit audio from ATV via Bluetooth connection. Even when the projector is switched to other input sources, such as HDMI, as ATV is still
running in the background, it will continue to transmit audio from ATV to the connected Bluetooth speaker or headphones.
• The projector does not support automatic re-connections with previously paired devices. In order to re-connect to a paired device or connect to another device, repeat
the steps above.