User Manual

ManualsBrandsBenq ManualsDigital ProjectorsGS50 DLP projector - portable - 802.11a/b/g/n/ac wireless / Bluetooth 4.2

Table Of Contents

Product support
- Servicing
Q&A Index
Package contents
- Standard accessories
Introduction
Installation
- Choosing a location
  - Using the projector in an outdoor setting
Operations
Android TV
Connections
Navigating the settings menu
- About the settings menu
- Using the Settings menu
Maintenance
- Care of the projector
Troubleshooting
Specifications
Appendix
- Installing the projector on a tripod (purchased separately)
Copyright and disclaimer

Adjusting the projected image

Adjusting the projection angle

The projector features a quick-release adjuster foot that allows you to adjust the projection angle.

To adjust the projection angle:

• Press the quick-release button and lift the front of the projector. Once the image is positioned as desired, release the quick-release button to lock

the foot in position.

• To retract the foot, hold up the projector while pressing the quick release button, then slowly lower the projector.

• The maximum angle of adjustment is 14.5 degrees.

• If the screen and the projector are not perpendicular to each other, the projected image becomes trapezoidal. To correct this, see Correcting keystone on page 40 for

details.

14.5