User Manual

36
Shutting down the projector
1. Press and hold the power button on the projector or remote control for over 3 seconds and the projector will shut down directly.
2. The power LED will flash a breathing green pattern (see LED indicators on page 18). The fans may continue to run in order to cool the system.
If the projector will not be used for an extended period, unplug the power cable from the power outlet and remove the batteries from the remote
control.
Short pressing the power button on the projector or remote control will trigger a shutdown confirmation box. Under this condition, press the power button again to shut
down the projector.
I
I
3 seconds
3 seconds
or