User Manual

32
Starting up the projector
1. Install the provided ATV dongle into the ATV dongle port. See Installing the ATV dongle on page 28 for details.
2. Charge the battery or supply power to the projector as indicated in Charging the battery on page 31.
3. Press the power button on the projector for 3 seconds or remote control for 1 second. The power LED will flash a breathing green pattern.
If you are starting up the projector for the first time, it is suggested that the projector is within range of a wireless access point (e.g. a router) with a stable Internet
connection as some optional steps during the setup process require Internet access.
• When supplying power directly to the projector please use the supplied power cable to avoid possible dangers such as electric shock and fire.
• Prior to pairing the remote control to your projector you must ensure that your remote control is in range of the projector’s IR sensor. See Remote control effective
range on page 24 for more details.
• Powering on via the remote control will not work if you have not completed the setup wizard procedure or if the projector’s battery level is below 5%.
I
I
3 seconds
1 second
or