User Manual

35 Menu operation
INFORMATION menu
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Picture Mode, User Mode Management, Brightness,
Contrast, Color, Tint, Sharpness, Advanced, Projector Position, Sound, Source Rename
and Password.
ISF
The ISF calibration menu is password protected and only accessible by authorized
ISF calibrators. The ISF (Imaging Science Foundation) has developed carefully
crafted, industry-recognized standards for optimal video performance and has
implemented a training program for technicians and installers to use these
standards to obtain optimal picture quality from BenQ video display devices.
Accordingly, we recommend that setup and calibration be performed by an ISF
certified installation technician.
For more information, go to www.imagingscience.com or contact the dealer or retailer from whom
you purchased the projector.
Firmware
Upgrade
Updates firmware version.
INFORMATI
ON
• Source: Shows the current signal source.
• Picture Mode: Shows the selected mode in the Picture menu.
• Resolution: Shows the native resolution of the input signal.
• Color System: Shows input system format.
• Color Gamut: When HDR10 is enabled, shows enabled Color Gamut. When
HLG is enabled, shows BT. 2020.
• Light Usage Time: Shows the number of hours the lamp has been used.
• 3D Format: Shows the current 3D mode.
• Firmware Version: Shows the firmware version of your projector.
• Service Code: Shows the serial number of your projector.