User Manual

64 Operation (under non-Launcher source)
Below is the overview of the Advanced OSD menu.
Likewise, when you wish to switch from the Advanced OSD menu to the Basic OSD menu, follow
the instructions below:
1. Go to Advanced Menu - System > Menu Settings and press OK.
2. Select Menu Type and OK.
3. Press / to select Basic. Next time when you turn on the projector, you may access the Basic
OSD menu by pressing .
Securing the projector
Using a security cable lock
The projector has to be installed in a safe place to prevent theft. Otherwise, purchase a lock to secure
the projector. You can locate a security bar on the bottom side of the projector. See item 19 on page 9.
Utilizing the password function
Setting a password
1. Go to Advanced Menu - Settings > Security Settings. Press OK. The Security Settings
page appears.
2. Highlight Change Password and press OK.
3. The four arrow keys ( , , , ) respectively
represent 4 digits (1, 2, 3, 4). According to the password
you desire to set, press the arrow keys to enter six digits
for the password.
4. Confirm the new password by re-entering the new
password.
Once the password is set, the OSD menu returns to the
Security Settings page.
5. To activate the Power On Lock function, press / to
highlight Power On Lock and press / to select On. Input the password again.
Main menu
& Main
menu icon
Press to go to
the previous page.
Sub-menu
Press to go to
the previous page
or to exit.
Current
input signal
Status
Press OK
to enter the
menu.
Picture
Picture Mode
Brightness
Contrast
Color
Sharpness
Brilliant Color
Off
Reference Mode
1
7
6
Advanced Color Settings
Display
Settings
Information
Enter Exit
Return
Presentation
Presentation
Reset Picture
System
2
3
4
5
1
5
2
6
3
7
4
Input New Password
Return