User Manual

63 Operation (under non-Launcher source)
Operation (under non-Launcher source)
Using the projector menus under non-Launcher source
When the input signal is HDMI or PC/YPbPr, you can use 2 types of On-Screen Display (OSD)
menus for making various adjustments and settings.
• Basic OSD menu: provides primary menu functions. (See Basic menu on page 67)
• Advanced OSD menu: provides full menu functions. (See Advanced menu on page 68)
To access the OSD menu, press on the projector or remote control.
• Use the arrow keys ( / / / ) on the projector or remote control to move through the menu
items.
• Use OK on the projector or remote control to confirm the selected menu item.
The first time you use the projector (after finishing the initial setup), Basic OSD menu displays.
Below is the overview of the Basic OSD menu.
If you intend to switch from the Basic OSD menu to the Advanced OSD menu, follow the
instructions below:
1. Go to Basic Menu > Menu Type.
2. Press OK and press / to select Advanced. Next time when you turn on the projector, you
may access the Advanced OSD menu by pressing .
The OSD screenshots below are for reference only, and may differ from the actual design.
Menu Type
Press OK to enter
the menu.
Main menu Status
Current input
signal
Press to go to
the previous page or
to exit.
Basic Menu
Brightness
Aspect Ratio
2
1
2
6
Light Mode
Picture Mode
Volume
Information
Menu Type
Auto
Presentation
SmartEco
Enter
Exit
5
3
4
Wireless LAN
1
4
2
5
3
6