User Manual

35 Operation (under Launcher source)
Wireless Hotspot
In situations where the projector is out-of-range of a wireless network (for example while on a camping
trip), you can configure the projector to act as a wireless hotspot to create a closed network for
devices to connect directly to the projector via a wireless connection and to project files from their
local storage.
To create a wireless hotspot:
1. Install the wireless dongle provide into the wireless dongle port (see Installing the wireless dongle
on page 8).
2. Power on the projector (see Operation (under Launcher source) on page 25).
3. On the home screen of the BenQ Launcher interface, press the down arrow key the three
times to navigate to the Settings menus.
4. Select Settings and press OK.
5. Select Hotspot and press OK.
The projector will have no access to the Internet while in wireless hotspot mode.