User Manual

OSD menu operations 34
Keyboard control Locks/Unlocks the buttons on the rear panel of the display.
• Unlock: Unlocks the buttons.
• Lock All: Locks the buttons.
• Lock All but Volume: Only allows you to adjust the
volume of the display.
• Lock All but Power: Only allows you to turn on/off the
display.
• Lock All except PWR & VOL: Only allows you to turn
on/off the display and adjust the volume of the display.
Tiling Allows you to create a video wall that consists of up to 150
displays.
This option is accessible only when the input source is set to VGA
IN, DVI IN, HDMI IN or OPS.
• Switch on Delay: Sets the power-on-delay time (Off /
Auto / 2 to 255 seconds).
• Brightness: Adjusts the brightness of the displays of a
video wall (Normal / ACS).
• H monitors: Sets how many columns of display there are
for the video wall (1 to 15).
• V monitors: Sets how many rows of display there are for
the video wall (1 to 10).
• Position: Sets the display position in the video wall.
• Frame comp.: Removes a small amount of graphical data
for each display so that all displays can operate as one large
canvas to display video content (Off / On).
• Enable: Check to enable the tiling function.
Off timer Allows the display to automatically turn off after a specified
number of hours (Off / 1 to 24 hours).
Date and time • Auto Sync: Allows the display to synchronize the date and
time with the NTP (Network Time Protocol) server (On /
Off).
• Set date: Sets the date for the display.
• Set time: Sets the time for the display.
• Choose time zone: Sets the time zone for the display.
• NTP Server: Displays the NTP server address.
• Current date and time: Displays the current date and
time of the display.
Menu Description