Quick Start Guide
Table Of Contents
- Copyright
- Disclaimer
- Display installation guide
- Video wall installation guide
- Precautions
- Notes on moving the display
- Installing
- Installing edge finishing kit: PL460/PH460/PH550/PL550
- Making a daisy chain
- Different types of daisy chain
- Operating Instructions of Edge Alignment Kit/Pin: PL490/PL552/PL553/PH5501/PH5502
- Tiling: PL490/PL552/PL553/PH5501/PH5502
- Operating Instructions of Edge Alignment Kit/Pin: PL4901/PL5501/PL5502
- Tiling: PL4901/PL5501/PL5502
- Special signage installation guide
- Mounting installation
- Digital Signage Bar-Type Series
- Digital Signage Rotation/Portrait Guide
- Troubleshooting
- Preventing afterimage burn-in
- Appendix 1: Installation Checklists
- Appendix 2: Basic Troubleshooting Checklists for IFP & IL series
- Appendix 3: Basic Troubleshooting Checklists for Video Wall
- Appendix 4: Basic Troubleshooting Checklists for X-Sign
63 Digital Signage Bar-Type Series
2. Change the screen refresh rate to 60Hz in Monitor section. The content should be
allocated at the right ratio.
Method 2: Content is in the upper section of 1920 x 1080
1. In Windows Setting > Display > Advanced display setting, select the BH3801 and
choose 1920 x 1080 as resolution setting.
2. On BH3801, choose 1:1 in Display > Zoom mode to correctly display the content.
3. To proceed further Windows control, choose Full in Display > Zoom mode to gain full
screen access on BH3801.