Quick Start Guide
Table Of Contents
- Copyright
- Disclaimer
- Display installation guide
- Video wall installation guide
- Precautions
- Notes on moving the display
- Installing
- Installing edge finishing kit: PL460/PH460/PH550/PL550
- Making a daisy chain
- Different types of daisy chain
- Operating Instructions of Edge Alignment Kit/Pin: PL490/PL552/PL553/PH5501/PH5502
- Tiling: PL490/PL552/PL553/PH5501/PH5502
- Operating Instructions of Edge Alignment Kit/Pin: PL4901/PL5501/PL5502
- Tiling: PL4901/PL5501/PL5502
- Special signage installation guide
- Mounting installation
- Digital Signage Bar-Type Series
- Digital Signage Rotation/Portrait Guide
- Troubleshooting
- Preventing afterimage burn-in
- Appendix 1: Installation Checklists
- Appendix 2: Basic Troubleshooting Checklists for IFP & IL series
- Appendix 3: Basic Troubleshooting Checklists for Video Wall
- Appendix 4: Basic Troubleshooting Checklists for X-Sign
45 Video wall installation guide
Operating Instructions of Edge Alignment Kit/Pin:
PL4901/PL5501/PL5502
The timing to use edge alignment kit is when the display is already installed and aligned with
best effort but still requires slight adjustment, that said to install alignment kit when the
adjacent display within less than 0.5mm pitch is advised.
Installed with caution and with advice by experienced installer is required; forcing the display to
align by the kit when the display is not properly installed will damage the display, as the display
might be bended and can cause damage to the panel.