Quick Start Guide
Table Of Contents
- Copyright
- Disclaimer
- Display installation guide
- Video wall installation guide
- Precautions
- Notes on moving the display
- Installing
- Installing edge finishing kit: PL460/PH460/PH550/PL550
- Making a daisy chain
- Different types of daisy chain
- Operating Instructions of Edge Alignment Kit/Pin: PL490/PL552/PL553/PH5501/PH5502
- Tiling: PL490/PL552/PL553/PH5501/PH5502
- Operating Instructions of Edge Alignment Kit/Pin: PL4901/PL5501/PL5502
- Tiling: PL4901/PL5501/PL5502
- Special signage installation guide
- Mounting installation
- Digital Signage Bar-Type Series
- Digital Signage Rotation/Portrait Guide
- Troubleshooting
- Preventing afterimage burn-in
- Appendix 1: Installation Checklists
- Appendix 2: Basic Troubleshooting Checklists for IFP & IL series
- Appendix 3: Basic Troubleshooting Checklists for Video Wall
- Appendix 4: Basic Troubleshooting Checklists for X-Sign
42 Video wall installation guide
• Using “Edge Alignment Kit-2” on adjacent two displays.
1. There are two loops of screw holes
(outer & inner), depend on the design of
each model. (Please check the user
manual for using loop information)
• Outer loop: Big screw holes for M6
screw.
• Inner loop: Small screw holes for M4
screw.
Remark:
• M6 screw: for PL552/PL553/PH5501/
PH5502
• M4 screw: for PL490
2.
1. There are two loops of screw holes (outer
& inner), depend on the design of each
model. (Please check the user manual for
using loop information)
• Outer loop: Big screw holes for M6
screw.
• Inner loop: Small screw holes for M4
screw.
2. Remark:
M6 screw: for PL552/PL553/PH5501/
PH5502