Quick Start Guide

32 Video wall installation guide
Setting the display position in landscape mode: PL460/PH460/PL550/PH550
If a landscape video wall has been installed, follow the procedures to set the display position.
1. Go to Screen > Display Wall > H. Monitors and V. Monitors on each display to set
the total number of displays counted horizontally and vertically.
2. Go to Screen > Display Wall > H. Position and V. Position on each display to set
the position. The position is defined by the X-Y matrix. Starting from the top left of the
video wall, the number increases as it goes down or goes to the right.
Different video wall layouts and display position setup
Set the display position carefully according to the video wall layout to ensure correct picture
output. Following are some examples for your reference.
(H=1.V=1) (H+1.V=1)
(H+1.V+1)(H=1.V+1)
X
(Represented as H for
horizontal position.)
Y
(Represented as V for vertical position.)
(1.1)
(2.1)
(2.2)(1.2)
(1.1) (2.1) (3.1) (4.1)
(1.1)
(1.2)
(1.3)
(1.4)
(1.1) (2.1) (3.1)
(1.2) (2.2) (3.2)
(1.3) (2.3) (3.3)