Quick Start Guide

26 Video wall installation guide
For a landscape video wall
For a portrait video wall
1. Mount the cosmetic plates in their
respective places on the edge of your
display, and screw in to place using the
6mm M4 screws.
2. On each corner, mount a corner enclosure
piece and fasten each one with 4 of the
5mm M3 screws. Where the displays meet,
use a flat enclosure piece, and fasten each
of these too with 4 of the 5mm M3 screws.
When mounting, make sure that all edge enclosure
pieces are fitted to the respective positions (i.e.
bottom to bottom, etc.)
1. Mount the cosmetic plates in their respec-
tive places on the edge of your display, and
screw in to place using the 6mm M4
screws.
2. On each corner, mount a corner
enclosure piece and fasten each one with
4 of the 5mm M3 screws. Where the
displays meet, use a flat enclosure piece,
and fasten each of these too with 4 of the
5mm M3 screws.
When mounting, make sure that all edge
enclosure pieces are fitted to the respective
positions (i.e. bottom to bottom, etc). When
rotating, the RIGHT side of the displays should be
on the bottom.
A
A
H
D
D
B
B
C
C
F
E
G
F
E
F
E
F
E
C
H
A
A
D
D
B
B
C
F
E
F
E
F
E
F
E
G