Quick Start Guide
Table Of Contents
- Copyright
- Disclaimer
- Display installation guide
- Video wall installation guide
- Special signage installation guide
- Mounting installation
- Digital Signage Bar-Type Series
- Troubleshooting
- Preventing afterimage burn-in
- Appendix 1: Installation Checklists
- Appendix 2: Basic Troubleshooting Checklists for IFP & IL series
- Appendix 3: Basic Troubleshooting Checklists for Video Wall
- Appendix 4: Basic Troubleshooting Checklists for X-Sign
49 Mounting installation
Mounting installation
For DH551F, three mounting options are available: Ceiling Mount on page 49, U-Mount on page
54, and H-mount on page 58.
Ceiling Mount
Tools needed
Secure bracket to ceiling
1. Identify types of the target ceiling: Concrete or wood.
2. Drill holes of diameter 10mm and depth 55mm in concrete ceiling with power drill. Please
select expansion screws according to types of the ceiling. The expansion screws (B) come
with your product are designed for cement wall only. Screws for wood ceiling installation
shall feature adequate strength and validated by qualified technicians.
3. Hammer the expansion screws (M8xL60) (B) in the holes drilled earlier and tighten their
nuts.
Power drill Drill head Hammer Wrench 12mm
Allen wrench 5mm/
6mm
Phillips Pencil
DO NOT secure the bracket to any decorative post or plasterboard for wood ceiling.